Add to Cart:

Klark Teknik DN9340E 2CH Digital EQ and Delay

$9,900.00

  • Model: DN9340E
  • Manufactured by: Klark Teknik



Helix Dual graphic / parametric / dynamic equaliser and delay

The concept of an equalisation device which allows the user to not only select from a menu of various EQ types but also to integrate them with each other in any combination is one that could only have come from Klark Teknik. At the heart of Helix DN9340E is the fact that it sounds incredible.

For the uninitiated, the new Helix DN9340E is a dual channel, 2RU, all-digital equalisation unit that simultaneously offers a five-mode 31-band graphic EQ, twelve bands of full parametric EQ, four configurable filters (HPF, LPF, hi shelf, lo shelf and notch) and two bands of true dynamic EQ (T-DEQ) per channel.

Unit control is provided by both a touch strip and rotary controls, full input and output metering is provided plus dedicated meters for the T-DEQ function. A large, bright LCD display provides visual reference for all functions and the entire menu structure is simple and intuitive. Helix can also be linked to Midas Siena, Legend and Heritage consoles via the Solo Tracking System (STS): this allows any channel of connected Helix EQ to be edited from the control surface of a single Helix DN9340E unit or PC simply by activating the appropriate PFL function on the console (STS only works on the outputs of the Siena).

By linking a DN9331 RAPIDE to the DN9340E it allows the user to have instant control over the Helix 31 band graphic EQ function thanks to the unique 31 Klark Teknik 100mm motorised faders fitted to this unit.

The Helix DN9340E also features AES/EBU digital inputs and outputs as standard, complete with word clock sync inputs. Whilst the internal sample rate of all DN9340/44E units remain at 48kHz/44.1kHz, these digital connections are all 96 kHz compatible allowing easy interface with any other digital device featuring the higher sample rate.Secondly the Helix DN9340E unit also features a dual port Ethernet communications interface. This is to facilitate much faster communication, response and metering between units than was previously possible with serial comms. The Ethernet ports allow for control of the units from a PC, either via Ethernet or wirelessly with the Helix EQ Remote Control Software (RCS) an ELGAR Add-In.

Configuration Data
  • Five-mode dual 31-band graphic equaliser Choice of Q: constant, reciprocal and proportional, plus DN360 and DN27 emulations
  • Dual 12-band parametric equaliser. All bands configurable 20Hz to 20kHz
  • Four configurable 8th-order filters per channel High pass / Low-pass High shelf / Low shelf Notch
  • Full function delay line per channel Up to 1s delay available Delay available in Time (milliseconds, microseconds) and Distance (feet / inches or metres)
  • THRESHOLD DEPENDENT EQUALISATION Two dynamic EQ filters per channel
  • Remote control software
  • Dual Ethernet ports
  • Full Remote control, wired or wireless, via PC and ELGAR and EQ Controller Remote Control Software
  • AES/EBU digital inputs and outputs.
  • Word clock sync port Link to DN9331 Rapide graphic controller
  • Solo Tracking System in conjunction with a Midas Heritage, Legend and Siena desk
  • Backwards compatible to non Ethernet DN9340 using Ethernet to serial converters

Digital Inputs Two
Digital Inputs One 2-Channel Input
Type AES / EBU
Impedance 110Ω
Sample Rate 44.1kHz, 48kHz, 88.2kHz*, 96kHz*
Word Length 24-bit or 16-bit
*SRC Input at these sample rates

Analogue Inputs Two
Type Electronically balanced (pin 2 hot)
Impedance (Ω) 20k
Common Mode Rejection >80dB @ 1 kHz

Word Clock Input
Type BNC
Impedance 75Ω

Digital Outputs One 2-Channel Output
Type AES / EBU
Impedance 110Ω
Sample Rate 44.1kHz, 48kHz, 88.2kHz**, 96kHz**
Word Length 24-bit
**SRC Output - these rates are only available when used in conjunction with a word clock or a digital input running at that frequency.

Analogue Outputs Two
Type Electronically balanced (pin 2 hot)
Maximum Level +21dBu into >2k

Performance
Frequency response (20Hz to 20kHz) 0.3 dB with all filters and EQ flat
Distortion (THD+N) @ +4dBu (20Hz to 20 kHz) <0.01%
Dynamic range (20Hz-20kHz unweighted) 115 dB

Processing (Per Channel)
Input Gain +12dB to -40dB in 0.1dB steps plus Off
Delay 0-1 second (342.25 m or 333'10 at 20C in 20.8us steps)
Filters 4 Filters (max)
Types Low Pass, High Pass, Low Shelf, High Shelf, Notch
Dynamic EQ 2 Bands (max)
Range 12dB
Responses Proportional, Constant, Symmetrical
Parametric EQ 12 Bands (max)
Range 12dB
Responses Proportional, Constant, Symmetrical
Graphic EQ 31 Bands On ISO standard frequencies
Range 12dB
Responses Proportional, Constant, Symmetrical, DN27, DN360

Power Requirements
Voltage 100 V - 240 V 10%
Consumption <60W

Terminations
Audio inputs/outputs 3 pin XLR
Ethernet inputs/outputs Ethercon
RS-232 8 pin Mini-DIN socket (front)
9 pin D-type (rear)
World Clock BNC
Power 3 pin IEC

Dimensions
Width 483 mm (19inch)
Height 88 mm (3.5 inch) - (2RU)
Depth 303 mm (12 inch)

Weight
Net 6kg
Shipping 8kg

STS Compatible

Show Command Component

Trade Descriptions Act:
Due to the company policy of continuing improvement, we reserve the right to alter these specifications without prior notice. E&OE


Your IP Address is: 54.92.253.128